ANSI Loadbreak Elbow connectors
Designed in accordance to IEEE Std 386 standard - latest revision.Details
Loadbreak Elbow Connector is a fully-shielded and insulated plug-in termination for connecting underground cable to transformers, switching cabinets and junctions equipped with loadbreak bushings.
Available in Two and Four positions. For sidewall and cover mountedDetails
Liquid Level gauges
Meets the all requirements of ANSI standard, and industry standard for level indicators.Details
Liquid level gauge indicates the oil level in transformers, regulators and other electrical equipment. The tank is normally filled with oil to the 25 degree centigrade level, which is marked on the tank wall.
Line crews need not be exposed to high voltage conductors and hot transformer fluidsDetails
To protect distribution apparatus from damaging currents and to protect distribution systems from failed apparatus.Details
Its ideal use is in a two-fuse protection scheme with a current-limiting backup fuse. In this arrangement, secondary faults and overload currents are cleared by the Bay-O-Net fuse, and high level faults are cleared by the current-limiting fuse. The two fuses are connected in series
The MagneX Interrupter combines safety and efficiency with economic operation.Details
One, Two & Three-Phase Magnex Interrupter. The magnex Interrupter protects distribution transformers from overloads and secondary faults. It can also be utilized as a transformer turn on-off switch.
Meets the full requirements of the latest revision of the IEEE Standard 386.Details
The bushing well are designed for the termination of primary winding leads at the front plate of fluid-filled apparatus rated at either 8.3/14.4 kV, 15.2/26.3 kV or 16.2/28.0 kV (for Canadian applications).
Meets the requirements of IEEE Std 386 standardDetails
ANSI Integral Deadbreak Bushings 600A
Deadbreak apparatus bushing meets the full requirements of IEEE Std 386Details
Maximum flexibility, available in two types: Integral Header (IHR) (9, 12, and 15 inches wide) and Welded…Details
Maximum flexibility, available in two types: Integral Header (IHR) (9, 12, and 15 inches wide) and Welded Header (12 and 15 inches and 520mm wide). The 520mm provides a DIN Standard radiator configured to meet North American requirements. Standard center line mounting lengths range from 21 to 180 inches.
- Carbon Steel :
- Stainless Steel :
- Hot Dip Galvanized :
Envirotemp FR3 fluid is a Fire Resistant Natural Ester dielectric coolant specifically formulated for…Details
Envirotemp FR3 fluid is a Fire Resistant Natural Ester dielectric coolant specifically formulated for use in distribution and power transformers where its unique environmental, fire safety, chemical, and electrical properties are advantageous.
- Bulk : 0425200A03
- 330 Gallon : 0425589A05
- 55 Gallon : 0425589A08
- 5 Gallon : 0425589A09
Pressure Relief Valves
ANSI and REA Standards specify pressure relief valves for oil filled equipment.Details
The Heartland pressure relief valve relieves excessive pressure in transformers, regulators and other electrical equipment.
- 5 PSI : 35 SCFM
- 10 PSI : 35 SCFM
- 10 PSI : 50 SCFM
- 10 PSI : 60 SCFM
Bay-o-net Fuse Holder
Vertical and horizontal mounting are avaliable.Details
It is designed for use in pad mounted or subsurface distribution transformers filled with Envirotemp FR3 fluid, transformer oil or approved equivalent. The assemblies combine the ease of hotstick operation with the safety of deadfront construction.
- 8.3 - 23 KV : 150 kV BIL.
Used to avoid re-energize faulted transformers.Details
Used in series with a Bay-O-Net type fuse or MagneX Interrupter. Isolation links are not fuses and do not have an interrupting rating. During a transformer failure, the isolation link will melt so that the opened primary circuit of a faulted transformer cannot be re-energized by the line crew.
ELSP Current-limiting Backup Fuse
Used in series with low current primary protection devices.Details
The ELSP fuse is designed for use in transformer oil, Envirotemp FR3 fluid, or an approved equivalent. The fuses highly efficient current limiting section minimizes the effects of high fault current stresses on equipment and the distribution system.
- 8.3 To 23 KV : 30 To 330 A
- 15.5 KV : 30 To 300A
They are designed conform to IEEE Standard 386, and IEEE Standard C62.11.Details
The M.O.V.E. Surge Arrester combines metal (zinc) oxide varistor technology in a pre molded rubber elbow to provide overvoltage system protection in an insulated, fully shielded, submersible, deadfront device.
Meets all the requirements of ANSI/IEEE Standard 386.Details
Bushing Insert threads into a universal bushing well to provide the same function as an integral loadbreak bushing. Using bushing inserts makes field installation and replacement possible and efficient.
line crews need not be exposed to high-voltage conductors and hot transformer fluids.Details
Externally operated series multiple switch is used to change connection of de-energized transformer windings between series and parallel to provide different common transformer voltage ratios.
It fully meets the requirements of IEEE Standard 386.Details
Rotatable Feedthru Insert is used to provide dual bushings from a single apparatus bushing well. It makes converting radial-feed transformers to feedthru transformers and adding in-line arrester protection both easy and practical.
ELX Full Range Fuses
It is ideal for installations where flame discharge and loud operation are undesirable.Details
ELX fuse is a full range current-limiting fuse designed to provide overcurrent protection. It is completely interchangeable with similar fuses using industry standard clip-style and dry well canister mountings.
- 8.3 KV : 3 To 100 A
- 15.5 KV : 3 To 100 A
- 23 KV : 3 To 80 A
It provide overload protection for all indoor and underground cable dis tribution systems 2.4 through 38 kV.Details
NX fuses are noiseless and expel no hot gases or burning particles while interrupting currents from minimum melt to maximum fuse rating (50,000 A through 23 kV, 35,000 A through 27 and 38 kV).
- 4.3 KV : 18 To 100 A
- 5.5 KV : 6 To 75 A
- 8.3 KV : 1.5 To 40 A
- 15.5 KV : 1.5 To 40 A
IEC Deadbreak Elbow Connector
Meet the requirements of VDE 0278, IEC 502-4, EDF HN 52-S-61, EEE Std 386 standard, BS 7215 and others.Details
IEC Integral Bushing
Mounting in vertical or horizontal position.Details
Meet The requirements ANSI standard for thermometers.Details
Cannister Fuse Holder
The drywell cannister and the current limiting fuse provides a versatile serviced current limiting protection system for transformers.Details
The Drywell Current Limiting Fuse Cannister is a removable fuse assembly for use in single and three phase pad-mounted transformers. The fuse well assembly accepts general purpose current limiting fuses and is available in both load-break and dead-break designs.
- 8.5 KV Class : 95 kV BIL
- 15 KV Class : 125 kV BIL
- 23 KV Class : 125 kV BIL
Standards: The IFD conforms to: IEEE C57.12.20, CSA C2.2, IEC 61936-1Details
GreenCap® Series now makes easy to distinguish the NEB fluid filled transformers from the Mineral Oil filled transformers.Details
Low Voltage Bushing
Available with either spade or stud connections.Details